Talco, Inc. - Vanguard Expansion Joints

The Vanguard Piping Compensator is designed for industrial applications. The basic concept of the piping compensator was originally developed by Rotherm Engineering for steam line applications in the paper industry.

Provides universal compensation for pipe movement - up to 35 percent of the overall length of the standard compensator casing (Dim A).

Becomes an integral part of the piping system-eliminating the need for tie rods, anchors, hinges, gimbals or other alignment devices.

Ten degrees angular compensation.

Full circle (360 degrees) torsion rotation-making it possible to install without the expense of unions.

Longitudinal compensation can be as much as 2D while lateral compensation is 0.0876 L, less calculated compression allowance for nipples, D.

Do not use stainless steel liners.

Unit of Measure

Items	6310004 1" Vanguard Expansion Joint	6310005 1 1/4" Vanguard Expansion Joint	6310006 1 1/2" Vanguard Expansion Joint	6310008 2" Vanguard Expansion Joint	6310010 2 1/2" Vanguard Expansion Joint
Size	N/A 1 in	N/A 1 1/4 in	N/A 1 1/2 in	N/A 2 in	N/A 2 1/2 in
Dimension A¹	N/A 10 1/8 in	N/A 10 1/8 in	N/A 11 1/2 in	N/A 12 15/16 in	N/A 13 1/16 in
Dimension B²	N/A 6 1/8 in	N/A 6 1/8 in	N/A 7 3/8 in	N/A 9 1/16 in	N/A 9 1/16 in
Dimension C	N/A 5 5/8 in	N/A 5 5/8 in	N/A 6 5/8 in	N/A 8 in	N/A 8 in
Dimension D	N/A 2 1/8 in	N/A 2 1/8 in	N/A 2 in	N/A 3 in	N/A 3 in
Dimension E	N/A 1.315 in	N/A 1.660 in	N/A 1.900 in	N/A 2.375 in	N/A 2.875 in
Dimension F	N/A 2 1/4 in	N/A 2 1/4 in	N/A 2 3/4 in	N/A 4 in	N/A 4 in
Dimension G	N/A 2 1/2 in	N/A 2 1/2 in	N/A 3 3/16 in	N/A 4 1/3 in	N/A 4 1/2 in
Dimension H³	N/A 13/32 in	N/A 13/32 in	N/A 33/64 in	N/A 39/64 in	N/A 39/64 in
Dimension I	N/A 5 º
Dimension J	N/A 2 1/16 in	N/A 2 1/16 in	N/A 2 15/16 in	N/A 2 19/32 in	N/A 3 31/32 in
Dimension K	N/A 1 in	N/A 1 1/4 in	N/A 1 1/2 in	N/A 2 in	N/A 2 1/2 in
Dimension L	N/A 4 11/16 in	N/A 4 11/16 in	N/A 6 in	N/A 7 1/16 in	N/A 7 1/16 in
Eff. Area	N/A 3.142 in²	N/A 3.142 in²	N/A 3.976 in²	N/A 9.621 in²	N/A 9.621 in²
¹ Dimension may vary up to 1/4" subject to individual installation practice. ² Dimension may vary up to 1/4" subject to individual installation practice. ³ Dimension shows total lateral (parallel) compensation (formula: H - 0.0876L)