The Vanguard Piping Compensator is designed for industrial applications. The basic concept of the piping compensator was originally developed by Rotherm Engineering for steam line applications in the paper industry.

Provides universal compensation for pipe movement - up to 35 percent of the overall length of the standard compensator casing (Dim A).

Becomes an integral part of the piping system-eliminating the need for tie rods, anchors, hinges, gimbals or other alignment devices.

Ten degrees angular compensation.

Full circle (360 degrees) torsion rotation-making it possible to install without the expense of unions.

Longitudinal compensation can be as much as 2D while lateral compensation is 0.0876 L, less calculated compression allowance for nipples, D.

Do not use stainless steel liners.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Size

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Quantity
6310004 N/A 1 in N/A 10 1/8 in N/A 6 1/8 in N/A 5 5/8 in N/A 2 1/8 in N/A 1.315 in
6310005 N/A 1 1/4 in N/A 10 1/8 in N/A 6 1/8 in N/A 5 5/8 in N/A 2 1/8 in N/A 1.660 in
6310006 N/A 1 1/2 in N/A 11 1/2 in N/A 7 3/8 in N/A 6 5/8 in N/A 2 in N/A 1.900 in
6310008 N/A 2 in N/A 12 15/16 in N/A 9 1/16 in N/A 8 in N/A 3 in N/A 2.375 in
6310010 N/A 2 1/2 in N/A 13 1/16 in N/A 9 1/16 in N/A 8 in N/A 3 in N/A 2.875 in
6310012 N/A 3 in N/A 16 in N/A 10 5/8 in N/A 9 1/2 in N/A 2 5/8 in N/A 3.500 in
6310016 N/A 4 in N/A 17 6/8 in N/A 10 3/4 in N/A 9 3/4 in N/A 3 1/2 in N/A 4.500 in
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1